Rear center seat belt, removing and installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Seatbelt Cover Cap, Guide And Webbing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pry off cover cap - 1 - and seatbelt guide - 2 -.
Unhook belt webbing - 3 - from lower fitting.
Remove cover and cushion, seat cushion backrest → Cover and cushion for backrest, removing and installing .

Fig 2: Removing/Installing Rear Center Seat Belt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Unscrew bolts - 1 - (Qty. 4, (23 Nm)) and remove belt mounting - 2 - from backrest frame - 3 -.
Unscrew hex nut - 5 - (40 Nm) and unhook automatic belt retractor - 4 - from backrest frame - 3 -.
Thread seatbelt with seatbelt strap downward out of backrest frame - 3 -.

NOTE:

To unreel seatbelt, automatic belt retractor must be held in installation position.