Steering wheel, assembly overview
WARNING: This page is about a different variant/trim than selected.
1 - Steering wheel
- Removing → Steering wheel, removing and installing
2 - Socket head bolt
- Tightening torque: 55 Nm
- Coated with locking compound
- May be used up to five times
- Press in a punch indentation after each installation
3 - Torx bolts
- Tightening torque: 5 Nm
4 - Airbag unit
- Because of the differing engaging mechanisms, only steering wheels and airbag units from same supplier can be installed.
- Removing, three-spoke steering wheel → Drivers side airbag unit, removing and installing (Three-spoke steering wheel)
- Removing, four-spoke steering wheel → Driver side airbag unit, removing and installing (Four-spoke steering wheel)
5 - Connector
6 - Securing plate