LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Body Exterior (A4 Platform)) >> 66 Exterior equipment >> Special components of Golf GTI 337 Edition/Jetta GLI Sport and Golf R32 >> Minimum curing time

Minimum curing time

WARNING: This page is about a different variant/trim than selected.

Minimum curing time for newly bonded special components is 3 hours.

Minimum curing time is time from applying components up to vehicle use. During this time, vehicle must stand on an even surface at room temperature (at least 60 ° F (15 ° C)).

CAUTION: Vehicle is operationally ready only after minimum curing time has elapsed.
scientia non olet · About LEMON Manuals