Bumper cover (Golf R32), removing and installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Bumper Cover (Golf R32)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing

Disconnect release lever from lid lock. Refer to Release lever, removing .
Remove radiator grille. Refer to Radiator grill, removing and installing .
Pull off covers - 9 - for headlight cleaning system from bumper cover and unclip.
Loosen bumper cover - 1 - in area of wheel-housing - 4 -.

Unclip left ventilation grid - 10 - and right ventilation grid - 12 -.
Remove bolts - 2 -. Remove bumper cover - 1 - from guide pieces - 3 - (left and right sides).
Disconnect harness connector from temperature sensor.

Installing

Installation is performed in the reverse order of removal.