Right spring, removing

Fig 1: Spring Holder V.A.G 1752/15 R. U. Install To Spring Compressor V.A.G 1752/1

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Install the spring holder V.A.G 1752/15 R. U. to Spring Compressor V.A.G 1752/1

Fig 2: Spring Holder V.A.G 1752/15 R. O. Set On The Highest Spring Coil

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Set the spring holder V.A.G 1752/15 R. O. on the highest spring coil.

Fig 3: Spring Compressor V.A.G 1752/1 And Spring Holder V.A.G 1752/15 R. U.

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Install the spring compressor V.A.G 1752/1-.

1 - Spring Compressor V.A.G 1752/1

2 - Spring holder V.A.G 1752/15 R. U.

Fig 4: Spring Compressor And Spring Holder Interlock Claws And Spring Holder Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Turn the spindle of the spring compressor in a clockwise direction so far, until the claws - arrows  - of spring compressor and spring holder interlock.
• Install bolt - 1  - at the top of spring holder.

The bolt - 1  - must be put in from the bottom.

• Turn the spindle of the spring compressor until the spring is slightly tightened.

Check whether the spring holders rest correctly against the spring coils. 

• Compress coil spring until the spring coils touch each other.
• Turn the wheel hub until one of the holes for the wheel bolts is at the 12 o'clock position.

Fig 5: Wheel Hub Support T10149 With A Wheel Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Wheel Hub Support T10149 with a wheel bolt.

Fig 6: Shock Absorbers Lower Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unscrew lower bolt - arrow  - from shock absorbers.
• Lower wheel bearing housing approx. 5 cm.
• Take the spring with the spring compressor from the vehicle.
• Placing spring with spring compressor.