Pulling out wheel hub

WARNING: This page is about a different variant/trim than selected.

Fig 1: Pulling Out Wheel Hub

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert thrust bolts - 1 - in wheel bearing housing.
Install support - 2 - , piston cylinder - 3 - with pull rod and special nut - 4 -.
Pull out wheel hub, hold tool securely.

1 - Thrust bolt E-15

2 - Bell E-40

3 - Piston cylinder HKZ-15

4 - Special nut E-8-214 and pull rod