Wheel bearing, pressing in

• Clean hole from wheel bearing housing

Fig 1: Wheel Bearing Hole Grease Application Area

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Grease hole with Molykote  grease completely.

Molykote grease, G 052 723 A2 

Use grease packet from repair kit

Fig 2: Pressing In Wheel Bearing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Install wheel bearing - 1  - , press piece - 2  - install with collar in bearing) and piston cylinder - 3  - with pull rod on wheel bearing housing.
• Install thrust piece - 4  - with wide collar toward wheel bearing housing and special nut - 5  - on inside.
• Press wheel bearing in by operating the pump.
• Insert circlip with needle nose pliers.

1 - Wheel bearing

2 - Press piece E-13-1

3 - Piston cylinder HKZ-15

4 - Press piece E-10

5 - Special nut E-8-214 and pull rod