Disassembling and assembling 1st and 2nd gear locking collar and synchro-hub

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of 1st And 2nd Gear Locking Collar And Synchro-Hub Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Spring

2 - Locking collar

3 - Synchro-hub

4 - Locking piece

Slide locking collar over synchro-hub.

The wide shoulder of the synchro-hub (arrow -A-) and the outer splines of the locking collar (arrow -B-) face opposite directions after assembly. Recesses for locking pieces on synchro-hub and locking collar must align.