LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (2.0L - Lubrication - Engine Code(S): AXX, BPY & BWA (A5 Platform)) >> 17 Lubrication >> General Information >> General Repair Information

General Repair Information

WARNING: This page is about a different car, the 2008 Volkswagen Jetta, 2008 Volkswagen GLI, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If large quantities of metal particles or abraded material are detected during engine repairs, it may be an indication of a damaged crankshaft or rod bearings. To prevent further damage, perform the following steps after the repair:

Carefully clean the oil passages.

Replace the oil injection jets.

Replace the oil cooler.

Replace the oil filter.

Oil level must not exceed the Max. marking - danger of catalytic converter damage!