LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (2.0L - Fuel Supply - Engine Code(S): CBFA & CCTA (A5 Platform)) >> 20 Fuel Supply >> Description And Operation >> Accelerator Pedal Module Overview

Accelerator Pedal Module Overview

WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accelerator Pedal Module, Assembly Overview
GWWN20-10055Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Connector
    • Black, 6 pin.
  2. Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-
    • Both sensors are integrated into one housing.
    • They are not adjustable.
    • The sensor transmits the driver control to the Engine Control Module (ECM).
    • -A- are the openings for the release Tool T10238.
    • Removing and installing, refer to ACCELERATOR PEDAL MODULE .
  3. Bolt
    • 10 Nm
  4. Cap
scientia non olet · About LEMON Manuals