LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (2.0L - Cooling System - Engine Code(S): CBFA & CCTA (Sedan) (A5 Platform)) >> 19 Cooling System >> General Information >> Coolant System

Coolant System

WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Risk of scalding due to hot steam and hot coolant:

  • The coolant system is under pressure when the engine is warm.
  • Wear protective goggles and protective clothing to prevent damage to eyes and scalding.
  • Reduce pressure by covering the coolant expansion tank cap with a cloth and carefully opening.
CAUTION:
  • When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:
  • Route lines of all types (for example, fuel, hydraulic, Evaporative Emission (EVAP), coolant, refrigerant, brake fluid and vacuum) and electrical wiring so that the original path is followed.
  • To prevent damage to the lines, make sure there is sufficient clearance to all moving or hot components.
NOTE:

Install only approved clamps for securing hose connections.

The arrows on the coolant pipes and ends of the coolant hoses must align when installing.

scientia non olet · About LEMON Manuals