Engine, Securing To Engine And Transmission Holder Vas 6095

WARNING: This page is about a different car, the 2010 Volkswagen Jetta and 2009 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Lifting tackle 3033
Engine and Transmission Holder VAS 6095
Shop Crane - Load Cap = 700-1200 KGVAS 6100
Universal mounting VAS 6095/1

To perform the procedure, secure the engine to the engine and transmission holder VAS 6095 using the universal mounting VAS 6095/1.

Conditions

The transmission is separated from the engine.

Procedure

Fig 1: View Of Lifting Tackle 3033

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the lifting tackle 3033 as follows and raise slightly using the shop crane - load cap = 700-1200 KGVAS 6100.

Flywheel Side:

Position 4.

Vibration Damper Side:

Position 8.

-- Secure the engine to the engine and transmission holder VAS 6095 using the universal mounting VAS 6095/1.