LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (2.0L - Cooling System - Engine Code(S): AXX, BPY & BWA (A5 Platform)) >> 19 Cooling System >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2008 Volkswagen Jetta, 2008 Volkswagen GLI, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Air Conditioning Condenser to Radiator Bolt - 5
Auxiliary Coolant Pipe Bracket Nut (2)
  - 3
- 5
Auxiliary Coolant Pump to Bracket Bolt - 5
Ball Head Bolt to Coolant Pipe - 3.5
Bracket to Rear Coolant Pipe Nut - 8
Coolant Expansion Tank Bolt - 5
Coolant Fan to Fan Shroud Nut - 5
Coolant Flange to Cylinder Head Bolt - 10
Coolant Pipe to Coolant Thermostat Housing Bolt - 5
Coolant Pipe to Oil Cooler Bracket Bolt - 5
Coolant Pump to Cylinder Block Bolt - 15
Coolant Thermostat Housing to Cylinder Block Bolt - 15
Fan Shroud to Radiator Bolt - 5
Heat Shield to Ball Stud Bolt Nut - 3.5
Heat Shield to Coolant Pipe Bolt (1)
  - 40
- 30
Heat Shield to Coolant Pipe Nut - 6
Intake Air Guide to Radiator - 5
Radiator Bolt - 5
Toothed Belt Guard to Cylinder Block Bolt (3) - 10
(1) For bolt tightening clarification, refer to COOLING SYSTEM ASSEMBLY OVERVIEW, ENGINE SIDE  and see -items 1 and 2-.
(2) For nut tightening clarification, refer to AUXILIARY COOLANT PUMP ASSEMBLY OVERVIEW  and see -items 1 and 10-.
(3) Install with locking fluid
scientia non olet · About LEMON Manuals