LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (2.0L - Exhaust System, Emission Controls - Engine Code(S): CBFA & CCTA (Sedan) (A5 Platform)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Clamping Sleeve Nut - 23
Front Exhaust Pipe with Catalytic Converter to Turbocharger Nut (1), (2) - 40
Oxygen Sensor (2) - 55
Secondary Air Injection Pump Motor Bracket to Body Nut - 25
Secondary Air Injection Pump Motor to Bracket Nut - 9
Secondary Air Injection Solenoid Valve Bolt - 9
Suspended Mount to Subframe/Underbody Bolt - 25
Suspended Mount to Underbody Bolt (for attaching the fuel tank) (1) - 26
(1) Always replace
(2) Lubricate with hot bolt paste