Special Tools

Special tools and workshop equipment required 

• Thread Adapter from Kukko Support 22/1
• Bracket 30-211 A
• Thrust Piece T10042
• Drift T10169 or T10362
• Thrust Piece T40008
• Hot Air Blower V.A.G 1416
• Thrust Piece T10143 or
• Press Tool for Shaft Seal T10180
• Driving Sleeve VW 244 B
• Thrust Plate VW 401
• Thrust Plate VW 402
• Punch VW 407
• Tube 37 mm Dia. VW 416 B
• Guide Piece VW 436 A
• Guide Pin VW 439
• Holding Fixture VW 801
• Guide Piece 10-15
• Thrust Pad 3124
• Bearing Driver 3264
• Subframe Support Assem. Device 3290
• Thrust Piece T10203
• Punch VW 411
• Tube Trans. Drive Shaft VW 426
• Thrust Pad 16.5/28 mm Dia. VW 431
• Triple Square Socket Driver 3357
  Fig 1: Identifying 3357 Triple Square Socket Driver

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Connecting Pin T10027 A
  Fig 2: Identifying Connecting Pin T10027 A

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Hose Clamp Pliers V.A.G 1275
  Fig 3: Identifying Hose Clamp Pliers V.A.G 1275

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Sleeve VW 423
  Fig 4: Identifying Sleeve VW 423

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Pulling Hook T20143/1
  Fig 5: Identifying Extractor Hook T20143

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Transmission Support Jig 3336
  Fig 6: Identifying Transmission Support Jig. 3336

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Workshop Crane VAS 6100
  Fig 7: Identifying Shop Crane VAS 6100

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Thrust Block T10083
  Fig 8: Identifying Pressing Support T10083

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Drip Tray for VAS 6100 VAS 6208
  Fig 9: Identifying Drip Tray For Shop Crane VAS 6208

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 10: Identifying Special Tools: Engine Support Bridge, Engine Support Feet, Engine Support Adapter, Adapter & Transmission Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Engine Support Bridge 10-222 A
• Engine Support Feet 10-222 A/8
• Engine Support Adapter 10-222 A/3
• Adapter 10-222 A/18
• Transmission Support 3282

Fig 11: Identifying Special Tools: Transmission (EOS), Remove/Install

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Support Elements (Pins) 2382/29
• Adjustment Plate 3282/33
• Transmission Support Jig 3336
• Torque Wrench (5-50 Nm) V.A.G 1331
• Torque Wrench (40-200 Nm) V.A.G 1332
• Engine/Transmission Jack V.A.G 1383 A

Fig 12: Identifying Special Tools: Bracket, Engine Support Device, Adapter From Slide Hammer (Complete Set) And Hose Clamps

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Bracket T10346
• Engine Support Device 3300 A
• Adapter VW 771/40
• Hose Clamps up to 25 mm Dia. 3094

Fig 13: Identifying Special Tools: Transmission Housing, Shift Mechanism, Input Shaft, Output Shafts (Pinion Shafts), Differential And Selector Rods

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Holding Plate VW 309
• Holding Fixture VW 313
• Transmission Support VW 353
• Thrust Tube VW 455 or Sleeve 3160
• Slide Hammer-Complete Set VW 771
• -1- Kukko Puller 12-14.5 mm 21/1
• -1- Kukko Extractor 14.5-18.5 mm 21/2
• -1- Kukko Extractor 23.5-30 mm 21/4
• -1- Kukko Extractor 18.5-23.5 mm 21/3
• -3- Kukko Separating Tool 5-60 mm 17/0
• -4- Kukko Support 22/1
• -4- Kukko Support 22/2