Transmission, Transporting

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Transmission Support Jig 3336
Workshop Crane VAS 6100

-- Install the transmission support Jig 3336 to the transmission housing.

Fig 1: Identifying Transmission Support Jig VAS 3336

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the support arm on the sliding bar -arrow- using the locking bolt.

Fig 2: Identifying Adjustment For Support Arm On Sliding Piece With Locking Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Number of visible holes = 6.

-- Lift the transmission using a workshop crane and the transmission support Jig 3336.

-- Set the transmission down, for example, into the transport container.