Transmission, Without A Sealing Cap CIRCLIP: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
-- Transmission housing without a sealing cap circlip -A-.
Special tools and workshop equipment required
- Holding Plate VW 309
- Holding Fixture VW 313
- Transmission Support VW 353
- Thrust Tube VW 455 or Sleeve 3160
- Slide Hammer-Complete Set VW 771
- Kukko Puller 12-14.5 mm 21/1
- Kukko Separating Tool 5-60 mm 17/0
- Kukko Support 22/1
- Bracket 30-211 A
- Thrust Piece T10042
- Drift T10169 or T10362, see Figure.
- Thrust Piece T40008
- Torque Wrench (5-50 Nm) V.A.G 1331
- Hot Air Blower V.A.G 1416
- Drip Tray for VAS 6100 VAS 6208