LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Controls, Housing - Manual Transmission 02Q (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Description And Operation >> Shift Mechanism Overviews >> Shift Knob, Boot And Noise Insulation

Shift Knob, Boot And Noise Insulation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Shift Knob, Boot And Noise Insulation
GWWN34-10949Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Emblem 
    • Can be carefully pried out of a plastic or leather shift knob.
  2. Shift Knob 
  3. Clamp 
    • For securing the shift knob to the shift lever.
    • Attach to the shift knob using the hose clamp pliers V.A.G 1275.
    • Always replace.
  4. Center Console Cover 
    • Combined in one piece with the upper center console section on some versions.
  5. Noise Insulation 
    • Not on all vehicles.
    • The arrow on the noise insulation points in the direction of travel.
    • Retaining tab spacing varies.
    • Therefore can only be arranged in one position.
scientia non olet · About LEMON Manuals