LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Clutch - 02Q (Sedan) (A5 Platform)) >> 30 Clutch >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Clutch Pedal Mounting Bracket to Cross Panel Nut (1) - 25
Clutch Pedal to Mounting Bracket Through Bolt Nut (1) - 25
Impact Bolster Support to Steering Column Mounting Bracket Bolt (1)
- Secured with two bolts - 10
- Secured with one bolt - 20
Pressure Plate to Dual Mass Flywheel Bolt (2)
  M6 13
M7 20
Slave Cylinder with Release Bearing to Transmission Bolt (1)
-- Slave cylinder with metal housing (without locking fluid) - 12
-- Slave cylinder with plastic housing (with locking fluid) - 15
(1) Always replace
(2) Loosen and tighten in small steps and in a diagonal sequence