LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (6 SPD. Manual Transmission 02Y All Wheel Drive) >> 39R - Final drive, rear differential >> Shaft and head bevel gear (gear set), adjusting >> Shaft bevel gear, adjusting >> Adjust friction torque to following values:

Adjust friction torque to following values:

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
New bearings Used bearings * See note
200 to 250 Ncm 30 to 50 Ncm

* at least 50 km

A - Torque gauge, 0 - 600 Ncm, locally available

Fig 1: Identifying Special Tool
GW00002054Courtesy of VOLKSWAGEN UNITED STATES, INC.

B - Adapter of 1 / 2 on 3 / 4 drive