Haldex Clutch Pump -V181- , removing and installing: Installing
WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Installation is reverse of removal, noting the following:
- Replace gasket - A -.
- Replace O-rings - B - and - C -.
- Note different diameters:
- diameter of O-ring - B - = 31.5 mm
- diameter of O-ring - C - = 33 mm
- Press pump in until impact.
- Tighten bolts to tightening torque.
- Check oil level in Haldex clutch → Oil level in Haldex clutch, checking and changing .