Fog lamp housing, removing and installing:

Removing: 

• Remove screw - 2  -.

Fig 1: Fog Lamp Housing Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip cover - 1  - from retainers.

Fig 2: Fog Lamp Housing Screws

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws - arrows  -.

Fig 3: Fog Lamp Housing Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove fog light housing from bumper cover and disconnect electrical connection - arrow  -.

Installing: 

Install in reverse order of removal, noting the following:

• Check fog lamp function.
• Check fog lamp adjustment and adjust if necessary → 01 - Maintenance .