Battery post/terminal, handling instructions
CAUTION:
In order to prevent damage to the battery terminals and battery posts, observe the following:
- Battery terminals must only be placed on battery posts without using force (by hand only).
- Do not apply grease to battery posts/terminals.
- Battery terminals must be securely and fully seated on the battery post before tightening.
- Battery terminals that are torqued to specification must NOT be tightened any further. Terminal damage will result.
Battery terminal - 1 - and additional terminal - 2 - tightening torques can be found in table "Tightening torques: battery" → Battery, tightening torques .