LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.9L - Crankshaft, Cylinder Block - Engine Code(S): BKC, BLS, BRM & BXE (A5 Platform) >> 13 Engine - Crankshaft, Cylinder Block >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

Components Bolt Size Nm
Dual Mass Flywheel to Crankshaft Bolt (1)   60 + 90° turn
Engine Mount to Engine Support Bolt   60 + 90° turn
Sealing Flange Bolt   15
(1) Always replace

Engine Mount Bracket to Cylinder Block Bolt Tightening Sequence 

Fig 1: Identifying Engine Mount Bracket To Cylinder Block Bolt Tightening Sequence
GWWN13-10292Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

I : Underhood engine mount bracket, from 06.05

II: Under floor engine mount bracket, through 05.05

Tighten the engine mount bracket bolts in the sequence -1 through 3- shown to 40 Nm + 180° (1 /2 turn) additional turn.

scientia non olet · About LEMON Manuals