LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.9L - Crankshaft, Cylinder Block - Engine Code(S): BKC, BLS, BRM & BXE (A5 Platform) >> 13 Engine - Crankshaft, Cylinder Block >> Diagnosis And Testing >> Cylinder Bore, Checking

Cylinder Bore, Checking

Fig 1: Identifying Check Of Cylinder Bores
GWWV13-0280Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required 

-- Measure bores at 3 locations in both directions -A- across engine and -B- in line with crankshaft. Deviation from nominal size: max. 0.10 mm.

NOTE:

Cylinder bore must not be measured if cylinder block is secured to engine stand with holding fixture VW 540, or else results may be incorrect.

scientia non olet · About LEMON Manuals