LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.9L - Crankshaft, Cylinder Block - Engine Code(S): BKC, BLS, BRM & BXE (A5 Platform) >> 13 Engine - Crankshaft, Cylinder Block >> Description And Operation >> Ribbed Drive Belt Assembly Overview

Ribbed Drive Belt Assembly Overview

Fig 1: Ribbed Belt Drive, Assembly Overview
GWWN13-10003Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Vibration damper
    • Only possible to install in one position - Bores are offset
  2. 25 Nm
  3. Generator
  4. Bracket
    • For generator and A/C compressor
  5. Tensioner
    • To release tension on ribbed belt, pivot using an open-end wrench
  6. 25 Nm
  7. Air conditioner compressor
  8. 25 Nm
  9. Fitting sleeves
  10. Ribbed belt
    • Mark direction of rotation before removing
    • Check for wear
    • Do not kink
    • Removing and installing RIBBED DRIVE BELT .
scientia non olet · About LEMON Manuals