Data Bus On Board Diagnostic Interface J533: Notes
General information:
The Data Bus On Board Diagnostic Interface J533 "Gateway" is no longer integrated with the instrument cluster. It is now a separate control module.
"J533" performs the following functions:
- Performs data exchange between CAN-Bus systems "CAN-Bus powertrain","CAN-Bus comfort" and "CAN-Bus Infotainment"
- Transfers diagnostic data of CAN-Bus systems onto K-wire and vice-versa, allowing data from Vehicle Diagnosis, Testing and Information System VAS 5051/5052 to be utilized
- If Data Bus On Board Diagnostic Interface J533 is to be removed, the work procedure to read out the coding stored in the module must always be performed.
- Additional information:
Owners Manual
Self Study Program - Course Number 89103 "The 2005 new Jetta New Model Introduction"
Self Study Program - Course Number 873403 "The 2005 new Jetta - Electrical System"
Wiring Diagrams and Component Locations
On Board Diagnostic (OBD), functions:
Data Bus On Board Diagnostic Interface J533 is controlled by an internal microprocessor with On Board Diagnostic (OBD) capability. If malfunctions occur in monitored components, Diagnostic Trouble Codes (DTC) will be stored in memory.
Troubleshoot Data Bus On Board Diagnostic Interface J533 malfunctions by performing OBD program using Vehicle Diagnosis, Testing and Information System VAS 5051/5052 in operating mode "Guided Fault Finding".