Left Footwell Lamp W9 and Right Footwell Lamp W10, emoving and installing

Special tools, testers and auxiliary items required

Fig 1: Wedge 3409

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

Footwell light removal and installation procedure is the same for all lights in all locations as described below:

Removing:

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.
When removing switches, trim, covers or displays, prevent damage to visible areas of the interior by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).

Fig 2: Prying Out Footwell Light From Trim Underneath Instrument Cluster Using Trim Removal Wedge VAS 3409

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pry out footwell light from trim underneath instrument panel using trim removal wedge VAS 3409 or a screwdriver.

Fig 3: Left Footwell Light W9 And Right Footwell Light W10 Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Replacing lamp:

Fig 4: Retaining Tabs And Heat Shield

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disengage retaining tabs - 1 - and remove heat shield - 2 - from diffusion lens of light.

Fig 5: Prying Bulb From Socket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing:

Install in reverse order of removal.