LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical Equipment -- (A5 Platform) >> 94 - Lights, Switches - exterior >> Ignition/Starter Switch and Lock Cylinder >> Steering lock housing, removing and installing

Steering lock housing, removing and installing

CAUTION:
  • When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified in → Battery, disconnecting and connecting .
  • When removing steering column switches and drilling shear bolts, ensure that no metal shavings enter steering column switches.
  • Steering lock may be destroyed.
  • If steering lock is operated without lock cylinder, it locks and must be replaced.
  • Steering lock must not be operated without lock cylinder.
CAUTION: Special safety precautions apply to vehicles equipped with airbags. Heed all WARNINGS pertaining to airbag servicing → 69 PASSENGER PROTECTION, AIRBAGS, SEAT BELTS
NOTE:
  • To remove steering lock housing, it is first necessary to remove base carrier for steering column switches.

Removing: 

scientia non olet · About LEMON Manuals