Front Turn Signal Lamp M5 / M7, eplacing
NOTE:
- Left Front Turn Signal Lamp is illustrated
Removing:
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Pull off cover - 1 -.
- Rotate bulb holder - 1 - with Front Turn Signal Lamp in - direction of arrow - and pull out as far as the electrical cable permits.
- Push bulb - 2 - into socket - 1 - and rotate in - direction of arrow -.
- Remove bulb - 2 - from socket - 1 -.
Installing:
Install in reverse order of removal, noting the following:
CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing cap, ensure proper seating. Water intrusion will damage headlamp.
- Check headlamp function.
- Check headlamp adjustment and adjust if necessary → 01 - Maintenance .