Wiper motor, installing in frame

Fig 1: Wiper Motor Mounting Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert wiper motor with control module into wiper frame and secure with screws - arrows -.
Tighten all fasteners according to value in table → Wiper and Washer System, tightening torques .

Fig 2: Motor Crank Placed Onto Wiper Motor Shaft

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Place motor crank - 1 - onto wiper motor shaft. Distance - a - to stop - 2 - must be 3 ± 1 mm.
Install crank to wiper motor shaft using nut - 3 -.
Tighten all fasteners according to value in table → Wiper and Washer System, tightening torques .