Washer fluid reservoir filling tube, removing and installing

Removing: 

Fig 1: Filler Tube For Tank For Windshield Washer System And Headlamp Cleaning System Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect connecting tube - 1  - from filling - 3  -.
• Remove bolt - 2  -.
• Unclip hose retainer from filling tube - 3  - and remove it from vehicle.

Installing: 

Install in reverse order of removal, noting the following:

Fig 2: Casting Mark On Under Side Of Filler Tube And Engine Mounting Hole

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Locating pin on under side of filling tube must be inserted into hole - arrow  -.

Fig 3: Connecting Tube And Filler Tube Joined So That The Guides Engage In Each Other

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Connecting tube - 1  - and filling tube - 2  - must be joined so that the guides - arrows  - engage in each other.