Starter, checking

• Connect Vehicle Diagnosis, Testing and Information System VAS 5051/5052 → VAS 5051 / 5052  under Vehicle Diagnostic, Testing and Information System VAS 5051 / 5052, onnecting 
• Select operating mode "Guided Fault Finding"
• Enter information as prompted and press ">" to confirm.

After the DTC memory of all control modules has been checked:

• Use "Go to" button to select "Function / Component Selection"
• Select " Body (Repair Group 01; 27; 50 - 97)"
• Select "Electrical system int/ex (Repair Group 01; 27; 90-97)"
• Select "27 - Starter, power supply"

• Select "Electrical components"
• Select "Starter - B"
• Follow tester prompts