Wiring Harness Repair Kits
Wiring Harness Repair Kit VAS 1978
Wiring Harness Repair Kit VAS1978 makes optimal repair quality possible in the realm of vehicle electronics. Using the tools, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped on are used and can be connected to vehicle-specific wiring harness by the use of crimp connections. A pair of crimping pliers with three different crimp slots and a hot air gun for shrinking the crimp connections provide trouble-free electrical connection.
- Additional information:
Wiring Harness Repair Kit VAS1978 Users Manual
Upgrade Kit For VAS 1978
Upgrade Kit For VAS1978 VAS1978/50 is required to bring the "old" Wiring Harness Repair Kit VAS1978 up to the new standard of Wiring Harness Repair Set VAS1978A. The upgrade kit contains 4 assembly- and 10 release tools as well as new crimp pliers for crimp connections with changeable heads for Exchangeable Head, 0.35-2.5mm VAS1978/1-1, ead Adapter 4.0-6.0mm^2 VAS1978/2A and Head Adapter For Jpt Contacts VAS1978/9-1. Furthermore it contains new stickers, a new set of user instructions, crimp connections for 0.35mm 2 -wire cross sections and a roll of black felt adhesive tape.
Wiring Harness Repair Kit VAS 1978A
The new Wiring Harness Repair Set VAS1978A makes optimal repair quality possible in the realm of vehicle electronics. Using the new pliers, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped on are used and can be connected to vehicle-specific wiring harness by the use of the four different types of crimp connections. A pair of new crimping pliers with exchangeable heads and a hot air gun for shrinking the crimp connections provide trouble-free electrical connection.
- Additional information:
Wiring Harness Repair Set VAS1978A Users Manual
Release Tool Kit VAS 1978/35
The Release Tool Set VAS1978/35 is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools which can be used to professionally release or assemble e.g. round connector systems, flat terminals with one or two locks as well as single wire seals.
The application of the correct release tools to the respective locks can be found in the table in Release Tool Set VAS1978/35 Users Manual.