Battery Terminal Clamp and Terminal, Cleaning

Special tools, testers and auxiliary items required

Fig 1: Torque Wrench V.A.G 1331

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

Do not use rust remover, contact spray or grease because the lack of friction will cause the torque to be exceeded when installing and this will lead to the threaded connection breaking.

CAUTION: Danger of injury! Observe warning notes and safety precautions → Warnings and Safety Precautions under Warnings and Safety Precautions !

Fig 2: Cleaning Battery Terminal Clamp

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The battery terminal clamp is cleaned with the battery terminal cleaner wire brush using circular motions.

Fig 3: Cleaning Battery Terminal

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The battery terminal is cleaned with the bottom side of the terminal cleaner using circular motions.

CAUTION: Danger of injury! Observe warning notes and safety precautions!

NOTE:

Optimal contact is ensured if the bolted components are tightened to the specified torque after cleaning.