Front Passengers Airbag Disabled Indicator Lamp K145, emoving and installing
Removing:
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- When removing switches, trim, covers or displays, prevent damage to visible areas of the instrument panel by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).
CAUTION:
Special safety precautions apply to vehicles equipped with airbags. Heed all WARNINGS pertaining to airbag servicing → 69 PASSENGER PROTECTION, AIRBAGS, SEAT BELTS
- Remove center vents → 80 HEATING, VENTILATION .
- Disconnect electrical connections - arrows -.
- Disengage retaining tabs - arrows - and remove control lamp.
Installing:
Install in reverse order of removal.