Headlamps, assembly
NOTE:
- After performing any repairs or service that could affect headlamp aim, check/adjust aim → 01 - Maintenance
- Tightening torques → Headlamps, tightening torques
1 - Screws
- 4 Nm
2 - Adjustment guide
- Correcting installation position of headlamp → Headlamp installation position, correcting
3 - Left High Beam Headlamp M30 and Right High Beam Headlamp M32
- Lamp H7U 12 V, 55 W
- Replacing
4 - Left Parking Lamp M1 and Right Parking Lamp M3
- Lamp 12 V, W 5 W
- Replacing
5 - Cover
6 - Left Front Turn Signal Lamp M5 and Right Front Turn Signal Lamp M7
- Lamp 12 V, PY 21 W
- Replacing
7 - Bulb holder
- for Left Front Turn Signal Lamp M5 and Right Front Turn Signal Lamp M7
8 - Lock carrier
9 - Cover
10 - Bulb holder
- for Left Low Beam Headlamp M29 and Right Low Beam Headlamp M31
11 - Left Low Beam Headlamp M29 and Right Low Beam Headlamp M31
- Lamp H7 12 V, 55 W
- Replacing
12 - Headlamp housing
- Removing and installing → Headlamps, removing and installing:
- Correcting installation position of headlamp → Headlamp installation position, correcting
- Servicing headlamp securing lugs → Headlamp housing securing lugs, servicing