Fuse panel, removing and installing

Special tools, testers and auxiliary items required

Fig 1: Wedge 3409

Courtesy of VOLKSWAGEN UNITED STATES, INC.

CAUTION:

When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified in → Battery, disconnecting and connecting .
When removing switches, trim, covers or displays, prevent damage to visible areas of the interior by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).

Removing:

Fig 2: Removing Instrument Panel Driver Side Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove left instrument panel side cover - 1 - by inserting trim removal wedge VAS 3409 or a screwdriver into recess - 2 - and pry off cover - 1 - in - direction of arrow -.

Fig 3: Removing Fuse Holder In Left Instrument Panel

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove fuse assignment card - 1 - from fuse holder - 2 -.
Remove screws - arrows - and guide out fuse holder - 1 - toward inside as far as cable lengths permit.

Installing:

Install in reverse order of removal.