Light Switch E1, emoving and installing

The following are integrated with Light Switch E1 :

Removing:

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.
When removing switches, trim, covers or displays, prevent damage to visible areas of the instrument panel by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).

Fig 1: Removing Light Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Light Switch Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing:

Fig 3: Installing Light Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Hold light switch firmly and press in rotary knob of light switch - 1 - and turn slightly toward right - 2 -.
Hold rotary knob in this position and insert light switch into instrument panel - 3 -.
Turn rotary knob to position "0", elease and engage switch.