Fuel Filler/Rear Lid Remote Unlocking Button E463 and Rear Lid Remote Lock Key Switch E232, emoving and installing
NOTE:
- Push Button Illumination L76 is integrated in Fuel Filler/Rear Lid Remote Unlocking Button E463 and cannot be serviced separately.
Removing:
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- When removing switches, trim, covers or displays, prevent damage to visible areas of the interior by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).
- Remove door trim → 70 INTERIOR TRIM .
Fig 1: Fuel Filler/Rear Lid Remote Unlocking Button E463 And Rear Lid Remote Lock Key Switch E232 Electrical Connection
- Disconnect electrical connection - arrow -.
Fig 2: Fuel Filler/Rear Lid Remote Unlocking Button E463 And Rear Lid Remote Lock Key Switch E232 Retaining Tabs
- Disengage retaining tabs - arrows - and remove switch from door trim.
Installing:
Install in reverse order of removal.