Front Turn Signal Lamp Bulb M5 / M7, eplacing
NOTE:
- Left Front Turn Signal Lamp Bulb is illustrated.
Removing:
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Turn bulb holder with Front Turn Signal Lamp Bulb - 1 - in direction of arrow and remove.
- Push bulb into socket, twist counter-clockwise and remove from socket.
Installing:
CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing bulb, ensure proper seating of bulb holder. Water intrusion will damage headlamp.
NOTE:
Install in reverse order of removal, noting the following:
- Check bulb function.
- Check headlamp adjustment and adjust if necessary → 01 - Maintenance .