Assembly Overview
CAUTION:
- Using force to remove 12 volt power sockets and cigarette lighter receptacles without illumination can result in damage to the mounting sleeve retainers.
- Puller T40148 can be used to remove 12 volt power sockets and cigarette lighter receptacles with illumination only.
- The puller is not capable of releasing the retainers on receptacles without illumination.
- Receptacles without illumination usually cannot be removed without damage.
1 - Cigarette lighter receptacle with cable pig tail
- Removing and Installing → Cigarette Lighter Receptacle, Removing and Installing
2 - Cigarette Lighter Insert
3 - Power socket receptacle
- Removing and Installing → Cigarette Lighter Receptacle, Removing and Installing
4 - Cigarette lighter receptacle
- Removing and Installing → Cigarette Lighter Receptacle, Removing and Installing
5 - Mounting sleeve
6 - Bulb W5 12V, 1.2 Watt
- Removing and Installing → Cigarette Lighter Illumination, Removing and Installing
7 - Bulb holder
- Removing and Installing → Cigarette Lighter Illumination, Removing and Installing