Headlamp, removing
NOTE:
- Removal and installation of standard headlamps and headlamps with High Intensity Gas Discharge (HID) lamps is the same as described below. In the event an HID headlamp requires removal, read, understand and observe all safety precautions for servicing HID lamps → General information
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
NOTE:
- It is not necessary to disconnect battery.
- Removal of left headlamp is illustrated. Removal of right headlamp is the same.
- If one headlamp is removed, it must always be adjusted after installation → 01 - Maintenance .
- If a headlamp with HID lamps is removed, basic setting of headlamps must always be performed after installation → 01 - Maintenance .
- Disengage lock on electrical connection - arrow - and disconnect from headlamp housing.
- Remove front bumper → 63 BUMPERS
- Remove screw - arrow - at top of headlamp.
- Remove screw - arrow - at lower left of headlamp.
- Remove screw - arrow - at lower right of headlamp.