Parking Lamp Bulb M1 / M3, eplacing
NOTE:
- Left Parking Lamp Bulb is illustrated.
Removing:
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Remove cover - 1 -.
- Pull bulb holder - 1 - with Parking Lamp Bulb out of reflector as far as electrical cable permits.
- Remove Parking Lamp Bulb - 2 - in - direction of arrow - from bulb holder - 1 -.
Installing:
CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing cap, ensure proper seating. Water intrusion will damage headlamp.
NOTE:
Install in reverse order of removal, noting the following:
- Check bulb function.
- Check headlamp adjustment and adjust if necessary → 01 - Maintenance