Low Beam Headlamp Bulb M29 / M31, eplacing

NOTE:

Removing:

CAUTION:

Fig 1: Rotating Cover Cap

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Removing Lamp Socket With Low Beam Headlamp

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Turn bulb holder with Low Beam Headlamp Bulb - 1 - in - direction of arrow - and remove.

Fig 3: Remove Low Beam Headlamp From Lamp Socket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove Low Beam Headlamp Bulb - 2 - in - direction of arrow - from bulb holder - 1 -.

Installing:

CAUTION:

Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
When installing cap, ensure proper seating. Water intrusion will damage headlamp.

Fig 4: Low Beam Headlamp Inserted Into Lamp Socket So That Pin On Low Beam Headlamp Fits In Recess Of Lamp Socket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert Low Beam Headlamp Bulb - 1 - into bulb holder so that pin fits in recess - arrow - of bulb holder - 2 -.

Fig 5: Rotating Lamp Socket With Low Beam Headlamp After Inserted Into Headlamp

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert bulb holder with Low Beam Headlamp Bulb - 1 - into headlamp and rotate bulb holder in - direction of arrow -.

Fig 6: Rotating Cover Cap

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert cover - 1 - into recess on headlamp and tighten cover in - direction of arrow -.
Check headlamp function.
Check headlamp adjustment and adjust if necessary → 01 - Maintenance .