Emergency Flasher Switch E3, emoving and installing

Removing:

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.
When removing switches, trim, covers or displays, prevent damage to visible areas of the instrument panel by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).

Fig 1: Emergency Flasher Switch E3 Connectors

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Emergency Flasher Switch E3 Retaining Tabs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing:

Install in reverse order of removal.