Differentiating 1ST/2ND Gear Synchronization, Differentiating 3RD Gear Synchronization
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Modified 1st Gear Synchronization Components (From Transmission Build Date 02 05 0)
| The synchronizer ring -C- and inner ring -A- are made of brass. The outer ring -B- is made of steel. | Transmission Build Date | Assembling the Output Shaft, 1st to 4th Gears |
|---|---|---|
| 1st/2nd gear synchronization | Through 25 October 2009 | Refer to ASSEMBLING, THROUGH TRANSMISSION BUILD DATE 25 OCTOBER 2009 . |
| 3rd gear synchronization | Through 24 May 2000 | Refer to ASSEMBLING, FROM TRANSMISSION BUILD DATE 26 OCTOBER 2009 THROUGH 24 MAY 2000 . |
| The synchronizer ring -C-, the outer ring -B- and the inner ring -A- are made of steel. | Transmission Build Date | Assembling the Output Shaft, 1st to 4th Gears |
|---|---|---|
| 1st/2nd gear synchronization | From 26 October 2009 | Refer to ASSEMBLING, FROM TRANSMISSION BUILD DATE 26 OCTOBER 2009 THROUGH 24 MAY 2000 or ASSEMBLING, FROM TRANSMISSION BUILD DATE 25 MAY 2000 . |
| 3rd gear synchronization | From 25 May 2000 | Refer to ASSEMBLING, FROM TRANSMISSION BUILD DATE 25 MAY 2000 . |