LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> R32 >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Body On Board Diagnostic (OBD) (A4 Platform) [On Board Diagnostic (OBD) - Driver's Side Seat Adjustment, On Board Diagnostic (OBD)]) >> 01 On Board Diagnostic (OBD) >> Driver's Side Seat Adjustment, On Board Diagnostic (OBD) >> Display group overview >> Evaluating display group number 004

Evaluating display group number 004

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2006 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Display zone  Description  Display  Corrective action 
1 Driver's side mirror potentiometer X position 0 to 100 %1)
  • Visual check of wiring
  • Check that connectors of appropriate current circuit are correctly seated and tight while simultaneously watching the display
  • If the content of the display does not change when checking the connectors the malfunction must be repaired, or the component in question must be replaced
  • Erase DTC memory
  • Perform functional check
  • Check DTC memory again
2 Driver's side mirror potentiometer Y position 0 to 100%1)  
3 Passenger's side mirror potentiometer X position 0 to 100%1)  
4 Passenger's side mirror potentiometer Y position 0 to 100%1)  

1) The displayed values are dependant upon the mechanical swivelling range of the mirror and only serve as a rough check. During normal operation the values 0% and 100% will not be obtained. (0% corresponds to short to Ground, 100% responds to short to B+).