Wheel bearing, pressing in

• Position wheel bearing on wheel bearing housing.

Fig 1: Installing Piston Cylinder With Bolt, Special Tool And Thrust Piece

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Position thrust piece - 1  - on back of wheel bearing housing.
• Install piston cylinder - 2  - with bolt - 3  - , special tool - 4  - and thrust piece - 5  -.
• Build-up pressure with foot pump.
• Now check that all tools are correctly centered.

Fig 2: Press In Wheel Bearing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Then press in wheel bearing by operating the pump.

1 - Press piece E-6-1

2 - Piston cylinder HKZ-15

3 - Removal rods E-0-217

4 - Special nut E-8-214

5 - Press piece E-13-1

Install securing ring!