Vehicle Speed Sensor (VSS) G68 and Intermediate Shaft Speed Sensor G265, Removing And Installing

Removing

• Remove torque converter housing, refer to Transmission, disassembling and assembling  .
• Remove bearing and differential cage.
• Pull connector off sensor.

- 1  - Vehicle Speed Sensor (VSS) G68

Fig 1: Locating Vehicle Speed Sensor (1) & Intermediate Shaft Speed Sensor (2)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

- 2  - Intermediate Shaft Speed Sensor G265

• Remove sensor bolts and remove.

Installing 

• Insert new sensor and tighten bolts to 8 Nm.

Install remaining parts, refer to Transmission, assembling  .